How to import tests from YAML files saved in the Git repository

Copy your YAML files to a folder in your Git repository (YAML files under the root of the Git repository will be ignored). The plugin will create the test in the Performance Center project according to:

The file name (without extension) which will be used as test name.
The location of the file in the Git repository which will be the location of the test under the root folder ('Subject') in the Test Management tree.
The content of the YAML file which must be composed according to the parameters described in the tables below.

Note:

All parameters must be in lowercase.
When a backslash (\) occurs in a value provided to a parameter (for example, a folder separator in a file path), a double backslash (\\) must be used instead.
This feature is supported with Performance Center 12.61 and later versions.

Root parameters of the YAML file:

Parameter	Description	Required
controller	Defines the Controller to be used during the test run (it must be an available host in the Performance Center project). If not specified, a Controller will be chosen from the different controllers available in the Performance Center project.	No
lg_amount	Number of load generators to allocate to the test (every group in the test will be run by the same load generators).	Not required if each group defined in the 'group' parameter defines the load generators it will be using via the 'lg_name' parameter (see 'group' table below).
group	Lists all groups or scripts defined in the test. The parameter to be used in each group are specified in the 'group' table below.	Yes
scheduler	Defines the duration of a test, and determines whether virtual users are started simultaneously or gradually. See the 'scheduler' table below.	No

group:

Parameter	Description	Required
group_name	Name of the group (it must be a unique name if several groups are defined).	Yes
vusers	Number of virtual users to allocate to the group for running the script.	Yes
script_id	ID of the script in the Performance Center project.	Not required if the 'script_path' parameter is specified.
script_path	Path and name of the script to be added to the group, separated by double backslashes (\\). For example "MyMainFolder\\MySubFolder\\MyScriptName'. Do not include the Performance Center root folder (named "Subject").	Not required if 'script_id' parameter is specified
lg_name	List of load generators to allocate to the group for running the script. The supported values are: The hostname, as defined in Performance Center, of an existing load generator in Performance Center allocated as a host. "LG" followed by a number, to use an automatically matched load generator (recommended). "DOCKER" followed by a number, to use a dynamic load generator (available if your Performance Center server and project are set to work with Docker).	No
command_line	The command line applied to the group.	No
rts	Object defining the runtime settings of the script. See the 'rts' table below.	No

rts:

Parameter	Description	Required
pacing	Can be used to define the number of iterations the script will run and the required delay between iterations (see the 'pacing' table below).	No
thinktime	Can be used to define think time (see the 'thinktime' table below).	No
java_vm	Can be used when defining Java environment runtime settings (see the 'java_vm' table below).	No
jmeter	Can be used to define JMeter environment runtime settings (see the 'jmeter' table below).	No

pacing:

Parameter	Description	Required
number_of_iterations	Specifies the number of iterations to run; this must be a positive number.	Yes
type	Possible values for type attribute are: "immediately": ignores 'delay' and 'delay_random_range' parameters. This is the default value when no type is specified. "fixed delay": 'delay' parameter is mandatory. "random delay": 'delay' and 'delay_random_range' parameters are mandatory. "fixed interval": 'delay' parameter is mandatory. "random interval": 'delay' and 'delay_random_range' parameters are mandatory.	No
delay	Non-negative number (less than 'delay_at_range_to_seconds' when specified).	Depends on the value provided for the 'type' parameter.
delay_random_range	Non-negative number. It will be added to the value given to the 'delay' parameter (the value will be randomly chosen between the value given to 'delay' parameter and the same value to which is added the value of this parameter).	Depends on the value provided for the 'type' parameter.

thinktime:

Parameter	Description	Required
type	The ThinkTime Type attribute is one of: "ignore": This is the default value when no type is specified. "replay": Provide 'limit_seconds' parameter with value. "modify": Provide 'limit_seconds' and 'multiply_factor' parameters with values. "random": Provide 'limit_seconds', 'min_percentage' and 'max_percentage' parameters with values.	No
min_percentage	This must be a positive number.	Depends on the value provided for the 'type' parameter.
max_percentage	This must be a positive number (it must be larger than the value provided for the 'min_percentage' parameter).	Depends on the value provided for the 'type' parameter.
limit_seconds	This must be a positive number.	Depends on the value provided for the 'type' parameter.
multiply_factor	The recorded think time is multiplied by this factor at runtime.	Depends on the value provided for the 'type' parameter.

java_vm:

Parameter	Description	Required
jdk_home	The JDK installation path.	No
java_vm_parameters	List the Java command line parameters. These parameters can be any JVM argument. The common arguments are the debug flag (-verbose) or memory settings (-ms, -mx). In additional, you can also pass properties to Java applications in the form of a -D flag.	No
use_xboot	Boolean: Instructs VuGen to add the Classpath before the Xbootclasspath (prepend the string).	No
enable_classloader_per_vuser	Boolean: Loads each Virtual User using a dedicated class loader (runs Vusers as threads).	No
java_env_class_paths	A list of classpath entries. Use a double backslash (\\) for folder separators.	No

jmeter:

Parameter	Description	Required
start_measurements	Boolean value to enable JMX measurements during performance test execution.	No
jmeter_home_path	Path to JMeter home. If not defined, the path from the %JMETER_HOME% environment variable is used.	No
jmeter_min_port	This number must be lower than the value provided in the 'jmeter_max_port' parameter. Both 'jmeter_min_port' and 'jmeter_max_port' parameters must be specified otherwise the default port values is used.	No
jmeter_max_port	This number must be higher than the value provided in the 'jmeter_min_port' parameter. Both 'jmeter_min_port' and 'jmeter_max_port' parameters must be specified otherwise the default port values is used.	No
jmeter_additional_properties	JMeter additional properties file. Use double slash (\\) for folder separator.	No

scheduler:

Parameter	Description	Required
rampup	Time, in seconds, to gradually start all virtual users. Additional virtual users are added every 15 seconds until the time specified in the parameter ends. If no value is specified, all virtual users are started simultaneously at the beginning of the test.	No
duration	Time, in seconds, that it will take to run the test after all virtual users are started. After this time, the test run ends. If not specified, the test will run until completion.	No

In the example below:

The plugin automatically assigns the file name as the test name, and the folder path of the file in the Git repository is used to create the location of the test under the root folder ('Subject') in the Performance Center project.
In the content:
- Since no Controller and no load generator amount were specified, a random available Controller will be allocated to the test just before it is run and the 'lg_name' parameter specified in each group will be used.
- In the 'group' parameter:
  - We added two scripts. For each, we provided a unique value in the 'group_name' parameter, and the number of virtual users to run the group.
  - Since we did not know the ID of the scripts, we used the 'script_path' parameter in which we entered the script path (without "Subject") followed by the script name, and used double backslashes for separators.
  - We specified the load generators that will be used by each group (in this case, load generators will automatically be matched as we use the 'LG' prefix).
In the scheduler:
- We want all Virtual Users to be initialized gradually (45 seconds).
- We want the test to stop after 5 minutes (300 seconds).


##################################################
group:
- group_name: "TEstInt"
  vusers: '20'
  script_path: "plugin\\TEstInt"
  lg_name:
  - "LG1"
  - "LG2"
- group_name: "Mtours"
  vusers: '20'
  script_path: "plugin\\mtours"
  lg_name:
  - "LG3"
  - "LG4"
scheduler:
  rampup: '45'
  Duration: '300'
##################################################

In the example below:

The plugin automatically assigns the file name as the test name, and the folder path of the file in the Git repository is used to create the location of the test under the root folder ('Subject') in the Performance Center project.
Since the 'controller' and the 'lg_amount' parameters are specified, the specified Controller will be used to run the test and three automatch load generators will be used and shared by all groups.
The content of the file is defined with seven groups, all being set with the “rts” parameter:
- The “pacing” parameter is used with different options for all groups.
- The “java_vm” parameter is used for five scripts with JavaVM for protocol.
- The “thinktime” parameter is used with different options for four groups.
- The “jmeter” parameter is used for two scripts with JMeter for protocol.
In the scheduler:
- We want all Virtual Users to be initialized gradually (120 seconds).
- We want the test to stop after 10 minutes (600 seconds).


##################################################
controller: "mycontroller"
lg_amount: 3
group:
  - group_name: "JavaVuser_LR_Information_pacing_immediately_thinktime_ignore"
    vusers: 50
    script_id: 394
    command_line: "echo hello from JavaVuser_LR_Information_pacing_immediately_thinktime_ignore > c:\\hello_from_JavaVuser_LR_Information_pacing_immediately_thinktime_ignore.txt"
    rts:
      pacing:
        number_of_iterations: 2
        type: "immediately"
      java_vm:
        jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
        java_vm_parameters: "java_vm_parameters"
        enable_classloader_per_vuser: true
        use_xboot: true
        java_env_class_paths:
          - "java_env_class_path1"
          - "java_env_class_path2"
      thinktime:
        type: "ignore"

  - group_name: "JavaHTTP_BigXML_pacing_fixed_delay_thinktime_replay"
    vusers: 50
    script_path: "scripts\\java_protocols\\JavaHTTP_BigXML"
    command_line: "echo hello from JavaHTTP_BigXML_pacing_fixed_delay_thinktime_replay > c:\\hello_from_JavaHTTP_BigXML_pacing_fixed_delay_thinktime_replay.txt"
    rts:
      pacing:
        number_of_iterations: 2
        type: "fixed delay"
        delay: 10
      java_vm:
        jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
        java_vm_parameters: "java_vm_parameters"
        enable_classloader_per_vuser: true
      thinktime:
        type: "replay"
        limit_seconds: 30

  - group_name: "JavaVuser_LR_Information_immediately_pacing_random_delay_thinktime_modify"
    vusers: 50
    script_id: 394
    command_line: "echo hello from JavaVuser_LR_Information_immediately_pacing_random_delay_thinktime_modify > c:\\hello_from_JavaVuser_LR_Information_immediately_pacing_random_delay_thinktime_modify.txt"
    rts:
      pacing:
        number_of_iterations: 2
        type: "random delay"
        delay: 10
        delay_random_range: 20
      java_vm:
        jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
        java_vm_parameters: "java_vm_parameters"
        enable_classloader_per_vuser: true
        java_env_class_paths:
          - "java_env_class_path1"
          - "java_env_class_path2"
      thinktime:
        type: "modify"
        limit_seconds: 30
        multiply_factor: 2

  - group_name: "JavaHTTP_BigXML_pacing_fixed_interval_thinktime_random"
    vusers: 50
    #script_id: 392
    script_path: "scripts\\java_protocols\\JavaHTTP_BigXML"
    command_line: "echo hello from JavaHTTP_BigXML_pacing_fixed_interval_thinktime_random > c:\\hello_from_JavaHTTP_BigXML_pacing_fixed_interval_thinktime_random.txt"
    rts:
      pacing:
        number_of_iterations: 2
        type: "fixed interval"
        delay: 10
      java_vm:
        jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
        java_vm_parameters: "java_vm_parameters"
        enable_classloader_per_vuser: true
        java_env_class_paths:
          - "java_env_class_path1"
          - "java_env_class_path2"
      thinktime:
        type: "random"
        limit_seconds: 30
        min_percentage: 2
        max_percentage: 3

  - group_name: "JavaHTTP_BigXML_pacing_random_interval"
    vusers: 50
    script_path: "scripts\\java_protocols\\JavaHTTP_BigXML"
    command_line: "echo hello from JavaHTTP_BigXML_pacing_random_interval > c:\\hello_from_JavaHTTP_BigXML_pacing_random_interval.txt"
    rts:
      pacing:
        number_of_iterations: 2
        type: "random interval"
        delay: 10
        delay_random_range: 20
      java_vm:
        jdk_home: "C:\\Program Files\\Java\\jdk1.8.0_191"
        java_vm_parameters: "java_vm_parameters"
        enable_classloader_per_vuser: true
        java_env_class_paths:
          - "java_env_class_path1"
          - "java_env_class_path2"

  - group_name: "Mtours_pacing_random_interval"
    vusers: 50
    script_path: "scripts\\Mtours"
    command_line: "echo hello from Mtours_pacing_random_interval > c:\\hello_from_Mtours_pacing_random_interval.txt"
    rts:
      pacing:
        number_of_iterations: 2
        type: "random interval"
        delay: 10
        delay_random_range: 20
      jmeter:
        start_measurements: true
        jmeter_home_path: "c:\\jmeter"
        jmeter_min_port: 2001
        jmeter_max_port: 3001
        jmeter_additional_properties: "jmeter_additional_properties"
  - group_name: "Mtours_pacing_random_interval_Jmeter_default_port"
    vusers: 50
    script_path: "scripts\\Mtours"
    command_line: "echo hello from Mtours_pacing_random_interval_Jmeter_default_port > c:\\hello_from_Mtours_pacing_random_interval_Jmeter_default_port.txt"
    rts:
      pacing:
        number_of_iterations: 2
        type: "random interval"
        delay: 10
        delay_random_range: 20
      jmeter:
        start_measurements: true

scheduler:
  rampup: 120
  duration: 600
##################################################